XTX AIR eShop

This is a flush fitting brass dust plug that fits into the fill port on your BSA R-10. It is designed to keep dirt and debris out of your fill port while you are out and about.

It has a vent to allow air to vent off should you ever have a leak from your fill port on your R-10, preventing it from locking into your rifle.

For a standard brass dust plug please look in the eShop

The price includes 1st class post & packaging to the UK.

This is a brass dust plug to keep dirt and debris out of your BSA R-10 fill port while you are out and about.

It has a port to allow it to vent off any air should there be a leak from your fill port on your rifle.

This model may not work if you have a tilt & swivel bipod like the Harris because it covers the fill port. I do sell a flush fitting model, please look in the eShop.

The price includes 1st class post & packaging to the UK.

This extension is designed for people who have a Tench regulator and/or a pressure gauge fitted, which prevents them from using the larger diameter silencers on their BSA rifles.

The extension is designed to be the same diameter as the BSA barrel (15.5mm). It is 40mm long over-all, 25mm of which is the extension and 15mm is the male 1/2" UNF thread.

They are made from high grade aluminium, anodised and dyed black. They have a male 1/2" UNF thread on one end and a 1/2" UNF thread in the other.

They do not have any rifling and are not calibre specific.

The price includes 1st class post & packaging to the UK.

This pressure gauge/indicator is designed to replace the quick fill port on BSA and Gamo PCPs, such as the Ultra, Scorpion, Hornet, Lonestar, Dynamax etc. You can still use your standard BSA quick fill probe.

It is easy to DIY install by following the instruction video on my YouTube channel (link is on the links page of the website).

The actual gauge on this unit is rated at 250bar and is an "indicator" which gives you an indication of how much air pressure you have in your air cylinder, it is not a calibrated pressure gauge.

The price does NOT include Post & Packaging, please select the relevant option from the shop for the postage.

OUT OF STOCK expecting some more in the next few days.

If you own a BSA SuperTen (S10) bull barrel carbine (BBK) and you would like to add an additional silencer/moderator to it then you need an adaptor. This adaptor is a direct replacement for the end cap in your shroud, simply unscrew your end cap, fit this adaptor and then screw any 1/2" UNF silencer to the adaptor. Please note the male thread on the 1/2" UNF section is around 19mm long, please make sure your silencer has a thread deep enough to allow it to fit the adaptor. If your silencer will not fit please let me know, I can reduce the length of the threaded section to suit.

They are made from blued/blackened steel.

Please note these are machined to be concentric to the bore but your shroud may not be concentric to the bore if the shroud centralisers are not properly fitted/made. It is worth checking with a knitting needle or similar to make sure the pellets will not clip your silencer when fitted BEFORE firing it for the first time.

The price includes postage & packaging to the UK.

* Regulators out of stock more on order*

This is for the fitting of a Tench regulator to a BSA Ultra or Scorpion and a service.

For details of what is done when the regulator is fitted please have a look at the BSA Ultra/Scorpion section on the website.

This price does not include postage or any parts that may need replacing other than those normally replaced when carrying out a service or regulator fitting.

This is to fit a Tench regulator to your Air Arms (CZ) S200 and carry out a service. 

Please note that the regulator can only be fitted to the S200s with Quick Fill. If yours is the type that has a pressure gauge and the cylinder has to be removed to fill it then you will need your cylinder modifying/converting to Quick Fill to allow the regulator to be fitted. This can be done but at extra cost.

This is for one .22 BSA 10 shot magazine.

This is the latest red rotor magazine available from BSA, it will work in all BSA multi-shot PCP rifles appart from some SuperTens and Goldstars.

This price includes postage to the UK.

his is for one .177 BSA 10 shot magazine.

This is the latest blue rotor magazine available from BSA, it will work in all BSA multi-shot PCP rifles appart from some SuperTens and Goldstars.

This price includes postage to the UK.

Add this to your order if you want your action returned via Royal Mail Special Delivery.

Next day before 1pm delivery insured to £500 in the UK.

This is normally fine for Ultra actions and R-10 actions that have none of the accessories fitted.

Please only select this option if your parcel weighs less than 2kg, if it weighs more then please select the RMSD postage rate for 2-10kg or ParcelForce in the eShop.

Please select this option if you would like your action returned via Royal Mail Special Delivery and your parcel is between 2 and 10kgs.

The service is guaranteed next day before 1pm in the UK and is insured to £500.

If your parcel is below 2kgs please select the option in the shop for parcels below 2kg.

This is one of the best ways to post air rifle actions and stocks.

Please select this option for items such as pressure gauges and BBK adaptors etc that weigh less than 750g, that you would like to be sent via Royal Mail 1st class recorded delivery (signed for) in the UK.

For larger or high value items please select the correct postage option from the eShop.

The maximum compensation for this service is £46.